.....................................................................................................................................

When using any chemicals it is important to read and understand the safety precautions first on both the label and the material safety data sheet.

Different variables in the environment affect the ease in which graffiti can be removed. Generally graffiti is easier to remover from warm surfaces, furthermore fresh graffiti is easier to remove. If graffiti is particularly difficult to remove consider hiring a professional to use our DP1 Shadow Chaser.

SAFETY NOTICE:
When removing graffiti always use protective clothing including enclosed shoes, gloves & goggles. Always read follow the warnings on the bottle of graffiti removal product.

FIRST AID:
Follow directions on the graffiti removal product label being used or the relevant MSDS.

TEST NOTICE:
Always test graffiti removal product in an inconspicuous area for colour changes.

So Safe Graffiti Remover for Painted surfaces (Yellow label)

1. Read safety precautions!
2. Surface must be clean and DRY (yellow label does not work on wet surfaces).
3. Test an in conspicuous part of surface to test for product reaction.
4. Wipe over graffiti with nylon scourer / white rag.
5. Apply product undiluted to graffiti.
6. Allow at least 1 minute for product to penetrate graffiti.
7. Scrub graffiti with scourer or white rag.
8. Repeat steps 5 to 7 (as required).
9. Rinse / wipe all treated areas with water to remove graffiti remover (this will deactivate the product).
10. (RECOMMENDED) Apply So Safe Safety Shield to protect against future graffiti.

So Safe Graffiti Remover for Concrete surfaces (Blue label)

1. Read safety precautions!
2. Surface must be clean and DRY (blue label does not work on wet surfaces).
3. Test an in conspicuous part of surface to test for product reaction.
4. Wipe over graffiti with nylon/wire brush.
5. Apply product undiluted to graffiti.
6. Allow at least 3 minutes for product to penetrate graffiti.
7. Scrub graffiti with nylon/wire brush.
8. Repeat steps 5 to 7 (as required).
9. Rinse / wipe all treated areas with water to remove graffiti remover (this will deactivate the product).
10. (RECOMMENDED) Apply So Safe Safety Shield to protect against future graffiti.

So Safe Graffiti Remover for Professionals (Red label) - Useful to remove Shadows

1. Surface must be clean.
2. Test an in conspicuous part of surface to test for product reaction.
3. Wipe over graffiti with a wire / plastic brush.
4. Apply product undiluted to graffiti
5. Allow at least 2 minutes for product to penetrate graffiti.
6. Scrub graffiti with wire / plastic brush
7. Pressure clean surface with high pressure hose (hot water preferable) with your back to the wind, hit the wall at a 45 degree angle approximately 100mm from the surface.
8. Repeat steps 4 to 7 (as required).
9. NOTE: to remove difficult shadows, spray professional on surface and leave for an extended period (the shadow will fade away).
10. (RECOMMENDED) Apply So Safe Safety Shield to protect against future graffiti.

Powered by: